SSV - IPC64/19 FPPC

IPC64/19 WINDOWS 95 STARTER KIT

The SSV IPC64/19 Flat Panel PC Windows 95 Starter Kit is a standalone, Microsoft Windows 95 based industrial PC system for Win32 embedded- application development. Embedded applications that use the Microsoft Win32 APIs and are designed for Windows 95 can take full advantage of all Windows 95 performance features. Win32- based embedded applications feature several benefits over Win16- based applications, including preemptive multitasking, Win32 APIs, long filename support, separate message queues, and memory protection. Each Win32- based embedded application runs in its own fully protected, private address space, preventing it from causing the operation system or other applications to fail and preventing interference from errors generated by other applications.

To support preemptive multitasking, the Windows 95 kernel schedules the time allotment for running applications. This results in smoother concurrent processing and prevents any one application from using all system resources without permitting other tasks to run. An exception is when you run an MS-DOS- based application in MS-DOS Mode, which gives the application exclusive use of system resources. Win32- based embedded applications can implement threads to improve the level of detail at which they can take advantage of multitasking.

The SSV IPC64/19 Flat Panel PC Windows 95 Starter Kit comes with a CP/486DX1 PC/104 single board computer (SBC) and a 2.5" hard disk drive. Microsoft Windows 95 is installed on this hard disk. You get a ready- to- run system. Connect the starter kit power cable and the power supply and run Windows 95 (Win95) on the IPC64/19 Flat Panel PC. The SSV IPC64/19 Flat Panel PC Windows 95 Starter Kit contains the following parts:

1 * IPC64/19 with CP/486DX1 PC/104 SBC and 2.5" hard disk drive (with Win95 Setup)

1 * Power Cable with 7-pin female DIN Connector for the BB2 Base Board

1 * Keyboard I/F Cable with 5-pin female DIN Connector for the BB2 Base Board

1 * Cable with a RESET Switch for the BB2 Base Board

2 * SBC COM Port I/F Cables (COM1/COM2) with 9-pin male SUB-D Connector

1 * SBC LPT Port I/F Cable with 25-pin female SUB-D Connector

1 * LabLink III I/F Cable with two 25-pin male SUB-D Connectors

1 * 110-230 VAC/5 VDC Power Supply, 20W, with 7-pin male DIN Connector

Support Disk(s) and User Manual(s)

Win32 demo applications with source code

For using the IPC64/19 Flat Panel PC Windows 95 Starter Kit in Novell networks, please use the setup guide. Setup Guide for Novell Networks. Download - PDF File, 84.102 bytes. For using the Windows 95 TCP/IP stack, there is another setup guide. Flat Panel PC Windows 95 Starter Kit Download - PDF File, 113.829 bytes. If you using the IPC64/19M (monochrome version of the IPC64/19) Flat Panel PC Windows 95 Starter Kit, please see also Windows 95 Settings for the IPC64/19M.