CP/486DX2 COM1 / COM2 / LPT CABLE
With the ordercode KK1-SSP we offer a cable kit with three ribbon cables for the CP/486DX2 COM1, COM2 interface and the parallel port. The CP/486DX2 COM1 and COM2 ports are wired to 10- pin connectors. The cable kit COM interface cables with a 9- pin male SUB-D connector one one end convert the 10- pin CP/486DX1 connector pinout to a standard PC COM port pinout.

The signals of the CP/486DX2 parallel port are wired to a 26- pin connector. The cable kit with the ordercode KK1-SSP offers one 26- pin ribbon cable with a 25- pin female SUB-D connector on one end. This I/F cable convert the 26- pin connector pinout of the CP/486DX2 parallel port to a standard PC LPT port pinout. Please note: Before installing the cables, touch a metal case (i.e. the metal case of your desktop computer) with your hand to reduce any static electricity that might have build up while handling the CP/486DX2.

COM1 / COM2 Pinout on the 9-pin SUB-D Connector
Pin Name Function Direction
1 DCD Data Carrier Detect IN
2 RxD Receive Data IN
3 TxD Transmit Data OUT
4 DTR Data Terminal Ready OUT
5 GND Signal Ground ---
6 DSR Data Set Ready IN
7 RTS Request to Send OUT
8 CTS Clear to Send IN
9 RI Ring Indicator IN

LPT Pinout on the 25-pin SUB-D Connector
Pin Function Direction
1 Strobe I/O
2 Data Bit 0 I/O
3 Data Bit 1 I/O
4 Data Bit 2 I/O
5 Data Bit 3 I/O
6 Data Bit 4 I/O
7 Data Bit 5 I/O
8 Data Bit 6 I/O
9 Data Bit 7 I/O
10 Acknowledge IN
11 Busy IN
12 Paper End IN
13 Select IN
14 Autofeed OUT
15 Error IN
16 Init. Printer OUT
17 Select Input OUT
18 - 25 Signal Ground ---

| Home Page | Back to top | SBC Overview | SBC Starter Kits |
SSV SOFTWARE SYSTEMS PC/104 Products. CP/486DX2 SSP. File: P153.HTM, Last Update: 08-Sept-1999
Copyright (c) 1996 - 1999 WST. All rights reserved.