The DIL/NetPC Evaluation Board
For fast DIL/NetPC system integration and a short time-to-market with DIL/NetPC- based products we offer the DNP/EVA1 Evaluation Board. In the center of this board is a standard 2.54mm 64-pin DIL socket for the DIL/NetPC. Eight bits of the DIL/NetPC 20-bit general purpose parallel I/O (PIO) signals are connected to LEDīs. Eight other bits are connected to a 8-position DIP switch. For develop the interface to other application- specific parts (i.e. A/D converters, CAN field bus and other special I/Os ), the DNP/EVA1 Evaluation Board offers a big breadboard area with holes spaced at 2.54mm (0.1") intervals.
The DNP/EVA1 Evaluation Board requires only an external 5 VDC or 6 VDC power supply to operate. During the development and testing phase of a DIL/NetPC- based application, you will usually connect the DNP/EVA1 to a serial port of your PC. Please use a standard Null- Modemcable for this connection.
| DNP/EVA1 Components | |
|---|---|
| Name | Function |
| 10BASE-T | RJ45 Connector. Ethernet LAN Interface. |
| RESET | Switch for DIL/NetPC Reset. |
| POWER | 5 or 6 VDC Input from external Power Supply. |
| COM1 | SUB-D 9-pin Connector. COM1 RS232C Interface. |
| DIP Switch | 8-position DIP Switch connected with DIL/NetPC Port B. |
| LEDs | 8 LEDs connected with DIL/NetPC Port A. |
For more information please download or view the DNP/EVA1 schematics file Dnpeva1a.PDF (110.108 bytes) with the LED and DIP switch interface. This schematics also contains a 3.3 VDC power supply for the DIL/NetPC DNP/1486-3V, the Ethernet 10BASE-T local area network (LAN) interface with the RJ45 connector and the RS232C level shifter.
|
|
|
|
|
|
|
|
|
|